BMC Luna IQ Auto is an auto machine that can be set up with a minimum and maximum setting. The AUTO Machine adjusts up and down between these ranges throughout the sleep period to treat OSA.
Usually, AUTO Machines will stay at the minimum (start pressure) while the patient is awake. During sleep, the AUTO Machine will increase and reduce the pressure as required. Typically the pressure is higher when the patient is sleeping on their back and less when on their side. The pressure will also vary depending on the different sleep stages. The AUTO Machine will cope with all these changes by varying the pressure automatically as required.
What’s included in this purchase:
- BMC Luna IQ Auto
- Luna Heated Humidifier
- CPAP Hose (6′ = 1.8m long)
- Power cord
- Australian power supply
- Travel carry bag Air filter
- Spare air filter (1)
- Instruction manual
- Quick start guide
- Sleep therapy software 4GB SD card/memory chip
Cleaning: Clean the water chamber before using the humidifier for the first time. It is important to clean the water chamber once a week. The humidifier exterior may be cleaned with running water and a mild cleanser. After rinsing the humidifier, make sure to dry the lid and body entirely.
Travel: Empty the water from the humidifier water chamber before placing the machine and humidifier in the BMC carrying case. This case is designed to hold the device as well as the accessories in order to protect each part while traveling.
Elevation Settings: Set the elevation setting depending on the need, If the elevation setting is wrong the machine may produce an inaccurate pressure, if the atmospheric pressure surpasses the noted range, the leak alert may not work at its optimal potential.
Power: The Luna CPAP is capable of operating on 100 to 240 V and 50 / 60 Hz., the Luna machine can operate in any country, in some cases, a power socket adapter may be necessary.
Luna IQ AutoPAP System
Luna G2 Machine (PCBA and blower)
Luna G2 Humidifier Chamber heater plate
G3 Machine (PCBA and blower)
Luna G2 Water Chamber
Luna G2 Water Chamber clips
Luna G2 Tube: If it’s not under good maintenance, it’s recommended to change every 12 months, however it can last considerably longer if well maintained
Luna G2 SpO2 sensor
Luna G2 power cord
Luna G2 carry bag: Accessory, not covered under warranty
G3 Humidifier Water Tank
G3 heated Tube: If it’s not under good maintenance, it’s recommended to change every 12 months, however it can last considerably longer if well maintained
G3 Spo2 sensor
G3 Power Cord and Adaptor
PM2.5 Filter: Accessory, not covered under warranty
G3 Carry Bag: Accessory, not covered under warranty